JOLLY - Manual Bilge Pumps

[SRS1000]

JOLLY is a great manual bilge pump, designed to maximize performance, limiting at the same time physical effort.

JOLLY is a self priming continuous flow pump, which is used primarily for WATER, but can also be used for AIR.

• Dimensions: 49x18x10 cm
• Capacity: 1 liter
• Made in strong PP, with autolubricating properties
• Fully rotating handle
• It operates in ANY position, even upside down!

When used for WATER:

• DELIVERY HEIGHT exceeds 20 m (65 ft)!
• SUCTION HEIGHT exceeds 8 m (26 ft)!

The base of the pump can be screwed to the boat for easier operation.

JOLLY is packed inside a transparent plastic bag.

Enclosed are:

• 2 adaptors for 16 mm Ø (~ 5/8" Ø) hoses, to be attached to the intake and exhaust sides
• 2 adaptors for 25 mm Ø (~ 1" Ø) hoses, to be attached to the intake and exhaust sides
• 1 water intake strainer, to be attached to the suction intake end of the hose

Due to the large variety of uses, water hoses ARE NOT supplied together with JOLLY. Hoses are widely available in hardware and gardening stores. In case you cannot find them, or if you prefer us to supply them to you, please do not hesitate to ask!

When used for AIR, JOLLY is ideal as a LOW VOLUME - HIGH PRESSURE - LOW PHYSICAL EFFORT pump:

• JOLLY exceeds the pressure of 2 atm (28 psi)!

In order to use JOLLY as an air pump, the following optional extras may be required:

• [SRS1023] Spiral hose and universal fittings wheel





• [SRS1026] Pressure gauge with connection
  
  Supplied with protective plastic cap
  Maximum pressure 4 atm (58 psi).





• [SRS1027] Pressure gauge with connection and tire inflating pipe
  
  Supplied with protective plastic cap
  Maximum pressure 4 atm (58 psi).