Valve Wrenches
|
|
Zinc-coated steel and nylon wrenches for easy valve assembly.
PUSH-PUSH Valves
Wrenches used to tighten the valve body. The valve cage can be held using a standard 46 mm (1.81 inch) hexagon spanner.
SRSV100, SRSV200, SRSV300,SRSV400, SRSV500:
- Zinc-coated Steel [SRSV102]
- Nylon [SRSV105]
PROFILE Valves
SRSV600:
- Zinc-coated Steel [SRSV602]: The valve cage can be held using a standard 42 mm (1.65 inch) hexagon spanner.
- Nylon [SRSV601]: Two wrenches can be used simultaneously: one hole fits the valve body, the other one fits the valve cage.
|
|
Adapters for Inflatable Boat Valves
|
|
Detachable Bayonet Connection Adapter [SRSA100]
Adapter for our Push-Push Inflatable Boat Valves.
|
|
Detachable Universal Bayonet Connection Adapter [SRSA200]
Fits most inflatable boat valves with a bayonet connection.
|
|
Fixed Bayonet Connection Adapter for Push-Push Inflatable Boat Valves [SRSA300]
If you are afraid of loosing your Detachable Bayonet Connection Adapter [SRSA100], or if you think that the adapter might disconnect from the hose when pumping at high pressures, ask for our SUPER pumps to be supplied with our new Fixed Bayonet Connection Adapter [SRSA300] [highlighted in blu].
Our new Fixed Bayonet Connection Adapter is available on both SUPER pumps and SUPER pumps HIGH-PRESSURE [*just add a "B" to the end of the code of the pump].
Pumps with the new Fixed Bayonet Connection Adapter will come without the universal adapter wheel. If you think that you might also want to use the regular universal fittings, ask us to provide you with two hoses, one with the Fixed Bayonet Connection Adapter and one with the universal fittings wheel.
|
|
Pressure Gauges
|
|
Pressure Gauge [SRSV101]
Pressure gauge for direct pressure measurement on valve. It can be used on all our PUSH-PUSH Valves and PROFILE Valves.
It is supplied with a protective plastic cap.
Maximum pressure 1 atm (14.7 psi).
|
|
Pressure Gauge with Schockproof Protection [SRSV106]
Pressure gauge for direct pressure measurement on valve. It can be used on all our PUSH-PUSH Valves and PROFILE Valves.
It is supplied with a rubber-like shockproof protection.
Maximum pressure 1 atm (14.7 psi).
|
|
Pressure Gauge [SRS0100]
Pressure gauge supplied with a protective plastic cap.
Maximum pressure 1 atm (14.7 psi).
|
|
Pressure Gauge with Schockproof Protection [SRS0102]
Pressure gauge with rubber-like shockproof protection.
Maximum pressure 1 atm (14.7 psi).
|
|
Schockproof Protection for Pressure Gauge [SRS0101]
Rubber-like schockproof protection to be applied to our pressure gauges.
|
|
Connection for Direct Pressure Measurement on Valve [SRSV103]
Connection to be used on any of our pressure gauges for direct pressure measurement on valve. It can be used on all our PUSH-PUSH Valves and PROFILE Valves.
|